fond
Model Checking Contest 2023
13th edition, Paris, France, April 26, 2023 (at TOOLympics II)
LTSMin+red compared to other tools («Surprise» models, StableMarking)
Last Updated
May 14, 2023

Introduction

This page presents how LTSMin+red do cope efficiently with the StableMarking examination face to the other participating tools. In this page, we consider «Surprise» models.

The next sections will show chart comparing performances in terms of both memory and execution time.The x-axis corresponds to the challenging tool where the y-axes represents LTSMin+red' performances. Thus, points below the diagonal of a chart denote comparisons favorables to the tool while others corresponds to situations where the challenging tool performs better.

You might also find plots out of the range that denote the case were at least one tool could not answer appropriately (error, time-out, could not compute or did not competed).

LTSMin+red versus GreatSPN

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for GreatSPN, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to GreatSPN are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red GreatSPN Both tools   LTSMin+red GreatSPN
All computed OK 20 0 37   Smallest Memory Footprint
LTSMin+red = GreatSPN 0 Times tool wins 38 19
LTSMin+red > GreatSPN 0   Shortest Execution Time
LTSMin+red < GreatSPN 0 Times tool wins 37 20
Do not compete 4 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 0 24 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than GreatSPN, denote cases where LTSMin+red computed less values than GreatSPN, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, GreatSPN wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus ITS-Tools

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for ITS-Tools, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to ITS-Tools are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red ITS-Tools Both tools   LTSMin+red ITS-Tools
All computed OK 0 1 57   Smallest Memory Footprint
LTSMin+red = ITS-Tools 0 Times tool wins 45 13
LTSMin+red > ITS-Tools 0   Shortest Execution Time
LTSMin+red < ITS-Tools 0 Times tool wins 39 19
Do not compete 4 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 0 3 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than ITS-Tools, denote cases where LTSMin+red computed less values than ITS-Tools, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, ITS-Tools wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus Tapaal

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for Tapaal, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to Tapaal are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red Tapaal Both tools   LTSMin+red Tapaal
All computed OK 14 0 43   Smallest Memory Footprint
LTSMin+red = Tapaal 0 Times tool wins 21 36
LTSMin+red > Tapaal 0   Shortest Execution Time
LTSMin+red < Tapaal 0 Times tool wins 25 32
Do not compete 4 0 0
Error detected 0 13 0  
Cannot Compute + Time-out 0 5 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than Tapaal, denote cases where LTSMin+red computed less values than Tapaal, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, Tapaal wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus LoLa+red

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for LoLa+red, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to LoLa+red are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red LoLa+red Both tools   LTSMin+red LoLa+red
All computed OK 0 1 57   Smallest Memory Footprint
LTSMin+red = LoLa+red 0 Times tool wins 35 23
LTSMin+red > LoLa+red 0   Shortest Execution Time
LTSMin+red < LoLa+red 0 Times tool wins 29 29
Do not compete 4 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 0 3 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than LoLa+red, denote cases where LTSMin+red computed less values than LoLa+red, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, LoLa+red wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus Marcie+red

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for Marcie+red, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to Marcie+red are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red Marcie+red Both tools   LTSMin+red Marcie+red
All computed OK 0 0 57   Smallest Memory Footprint
LTSMin+red = Marcie+red 0 Times tool wins 15 42
LTSMin+red > Marcie+red 0   Shortest Execution Time
LTSMin+red < Marcie+red 0 Times tool wins 20 37
Do not compete 0 0 4
Error detected 0 0 0  
Cannot Compute + Time-out 0 0 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than Marcie+red, denote cases where LTSMin+red computed less values than Marcie+red, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, Marcie+red wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus Smart+red

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for Smart+red, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to Smart+red are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red Smart+red Both tools   LTSMin+red Smart+red
All computed OK 1 0 56   Smallest Memory Footprint
LTSMin+red = Smart+red 0 Times tool wins 30 27
LTSMin+red > Smart+red 0   Shortest Execution Time
LTSMin+red < Smart+red 0 Times tool wins 23 34
Do not compete 4 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 0 5 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than Smart+red, denote cases where LTSMin+red computed less values than Smart+red, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, Smart+red wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus 2022-gold

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for 2022-gold, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to 2022-gold are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red 2022-gold Both tools   LTSMin+red 2022-gold
All computed OK 26 0 31   Smallest Memory Footprint
LTSMin+red = 2022-gold 0 Times tool wins 27 30
LTSMin+red > 2022-gold 0   Shortest Execution Time
LTSMin+red < 2022-gold 0 Times tool wins 26 31
Do not compete 4 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 0 30 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than 2022-gold, denote cases where LTSMin+red computed less values than 2022-gold, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, 2022-gold wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus BVT-2023

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for BVT-2023, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to BVT-2023 are shown (you may click on one graph to enlarge it).

Important: here, LTSMin+red is compared to BVT-2023. It is a good way to check how LTSMin+red compete in terms of resource consomption with the best tools (even virtual). When LTSMin+red is best, the corresponding plots are on the diagonal of the scatter plots chart.

Statistics on the executions
  LTSMin+red BVT-2023 Both tools   LTSMin+red BVT-2023
All computed OK 0 2 57   Smallest Memory Footprint
LTSMin+red = BVT-2023 0 Times tool wins 0 59
LTSMin+red > BVT-2023 0   Shortest Execution Time
LTSMin+red < BVT-2023 0 Times tool wins 0 59
Do not compete 2 0 2
Error detected 0 0 0  
Cannot Compute + Time-out 0 0 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than BVT-2023, denote cases where LTSMin+red computed less values than BVT-2023, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, BVT-2023 wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus LoLA

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for LoLA, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to LoLA are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red LoLA Both tools   LTSMin+red LoLA
All computed OK 23 2 34   Smallest Memory Footprint
LTSMin+red = LoLA 0 Times tool wins 29 30
LTSMin+red > LoLA 0   Shortest Execution Time
LTSMin+red < LoLA 0 Times tool wins 25 34
Do not compete 4 0 0
Error detected 0 9 0  
Cannot Compute + Time-out 0 16 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than LoLA, denote cases where LTSMin+red computed less values than LoLA, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, LoLA wins when points are above the diagonal.

memory chart time chart

LTSMin+red versus Smart

Some statistics are displayed below, based on 122 runs (61 for LTSMin+red and 61 for Smart, so there are 61 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing LTSMin+red to Smart are shown (you may click on one graph to enlarge it).

Statistics on the executions
  LTSMin+red Smart Both tools   LTSMin+red Smart
All computed OK 52 0 5   Smallest Memory Footprint
LTSMin+red = Smart 0 Times tool wins 54 3
LTSMin+red > Smart 0   Shortest Execution Time
LTSMin+red < Smart 0 Times tool wins 54 3
Do not compete 4 0 0
Error detected 0 3 0  
Cannot Compute + Time-out 0 53 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where LTSMin+red computed more values than Smart, denote cases where LTSMin+red computed less values than Smart, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

LTSMin+red wins when points are below the diagonal, Smart wins when points are above the diagonal.

memory chart time chart