fond
Model Checking Contest 2023
13th edition, Paris, France, April 26, 2023 (at TOOLympics II)
Marcie+red compared to other tools («Known» models, QuasiLiveness)
Last Updated
May 14, 2023

Introduction

This page presents how Marcie+red do cope efficiently with the QuasiLiveness examination face to the other participating tools. In this page, we consider «Known» models.

The next sections will show chart comparing performances in terms of both memory and execution time.The x-axis corresponds to the challenging tool where the y-axes represents Marcie+red' performances. Thus, points below the diagonal of a chart denote comparisons favorables to the tool while others corresponds to situations where the challenging tool performs better.

You might also find plots out of the range that denote the case were at least one tool could not answer appropriately (error, time-out, could not compute or did not competed).

Marcie+red versus GreatSPN

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for GreatSPN, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to GreatSPN are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red GreatSPN Both tools   Marcie+red GreatSPN
All computed OK 620 19 851   Smallest Memory Footprint
Marcie+red = GreatSPN 0 Times tool wins 943 547
Marcie+red > GreatSPN 0   Shortest Execution Time
Marcie+red < GreatSPN 0 Times tool wins 960 530
Do not compete 52 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 4 657 90


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than GreatSPN, denote cases where Marcie+red computed less values than GreatSPN, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, GreatSPN wins when points are above the diagonal.

memory chart time chart

Marcie+red versus ITS-Tools

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for ITS-Tools, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to ITS-Tools are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red ITS-Tools Both tools   Marcie+red ITS-Tools
All computed OK 33 22 1438   Smallest Memory Footprint
Marcie+red = ITS-Tools 0 Times tool wins 974 519
Marcie+red > ITS-Tools 0   Shortest Execution Time
Marcie+red < ITS-Tools 0 Times tool wins 850 643
Do not compete 52 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 6 69 88


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than ITS-Tools, denote cases where Marcie+red computed less values than ITS-Tools, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, ITS-Tools wins when points are above the diagonal.

memory chart time chart

Marcie+red versus Tapaal

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for Tapaal, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to Tapaal are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red Tapaal Both tools   Marcie+red Tapaal
All computed OK 213 29 1258   Smallest Memory Footprint
Marcie+red = Tapaal 0 Times tool wins 412 1088
Marcie+red > Tapaal 0   Shortest Execution Time
Marcie+red < Tapaal 0 Times tool wins 600 900
Do not compete 52 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 15 251 79


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than Tapaal, denote cases where Marcie+red computed less values than Tapaal, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, Tapaal wins when points are above the diagonal.

memory chart time chart

Marcie+red versus LoLa+red

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for LoLa+red, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to LoLa+red are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red LoLa+red Both tools   Marcie+red LoLa+red
All computed OK 7 19 1464   Smallest Memory Footprint
Marcie+red = LoLa+red 0 Times tool wins 764 726
Marcie+red > LoLa+red 0   Shortest Execution Time
Marcie+red < LoLa+red 0 Times tool wins 775 715
Do not compete 52 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 1 41 93


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than LoLa+red, denote cases where Marcie+red computed less values than LoLa+red, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, LoLa+red wins when points are above the diagonal.

memory chart time chart

Marcie+red versus LTSMin+red

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for LTSMin+red, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to LTSMin+red are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red LTSMin+red Both tools   Marcie+red LTSMin+red
All computed OK 8 6 1462   Smallest Memory Footprint
Marcie+red = LTSMin+red 1 Times tool wins 744 733
Marcie+red > LTSMin+red 0   Shortest Execution Time
Marcie+red < LTSMin+red 0 Times tool wins 696 781
Do not compete 13 9 39
Error detected 0 0 0  
Cannot Compute + Time-out 6 12 88


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than LTSMin+red, denote cases where Marcie+red computed less values than LTSMin+red, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, LTSMin+red wins when points are above the diagonal.

memory chart time chart

Marcie+red versus Smart+red

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for Smart+red, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to Smart+red are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red Smart+red Both tools   Marcie+red Smart+red
All computed OK 5 16 1464   Smallest Memory Footprint
Marcie+red = Smart+red 2 Times tool wins 775 712
Marcie+red > Smart+red 0   Shortest Execution Time
Marcie+red < Smart+red 0 Times tool wins 635 852
Do not compete 52 0 0
Error detected 0 1 0  
Cannot Compute + Time-out 1 41 93


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than Smart+red, denote cases where Marcie+red computed less values than Smart+red, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, Smart+red wins when points are above the diagonal.

memory chart time chart

Marcie+red versus 2022-gold

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for 2022-gold, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to 2022-gold are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red 2022-gold Both tools   Marcie+red 2022-gold
All computed OK 15 31 1456   Smallest Memory Footprint
Marcie+red = 2022-gold 0 Times tool wins 163 1339
Marcie+red > 2022-gold 0   Shortest Execution Time
Marcie+red < 2022-gold 0 Times tool wins 204 1298
Do not compete 52 0 0
Error detected 0 5 0  
Cannot Compute + Time-out 11 42 83


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than 2022-gold, denote cases where Marcie+red computed less values than 2022-gold, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, 2022-gold wins when points are above the diagonal.

memory chart time chart

Marcie+red versus BVT-2023

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for BVT-2023, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to BVT-2023 are shown (you may click on one graph to enlarge it).

Important: here, Marcie+red is compared to BVT-2023. It is a good way to check how Marcie+red compete in terms of resource consomption with the best tools (even virtual). When Marcie+red is best, the corresponding plots are on the diagonal of the scatter plots chart.

Statistics on the executions
  Marcie+red BVT-2023 Both tools   Marcie+red BVT-2023
All computed OK 4 51 1467   Smallest Memory Footprint
Marcie+red = BVT-2023 0 Times tool wins 4 1518
Marcie+red > BVT-2023 0   Shortest Execution Time
Marcie+red < BVT-2023 0 Times tool wins 4 1518
Do not compete 22 69 30
Error detected 0 0 0  
Cannot Compute + Time-out 94 0 0


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than BVT-2023, denote cases where Marcie+red computed less values than BVT-2023, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, BVT-2023 wins when points are above the diagonal.

memory chart time chart

Marcie+red versus LoLA

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for LoLA, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to LoLA are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red LoLA Both tools   Marcie+red LoLA
All computed OK 148 33 1323   Smallest Memory Footprint
Marcie+red = LoLA 0 Times tool wins 316 1188
Marcie+red > LoLA 0   Shortest Execution Time
Marcie+red < LoLA 0 Times tool wins 235 1269
Do not compete 52 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 14 181 80


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than LoLA, denote cases where Marcie+red computed less values than LoLA, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, LoLA wins when points are above the diagonal.

memory chart time chart

Marcie+red versus Marcie

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for Marcie, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to Marcie are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red Marcie Both tools   Marcie+red Marcie
All computed OK 1471 0 0   Smallest Memory Footprint
Marcie+red = Marcie 0 Times tool wins 1471 0
Marcie+red > Marcie 0   Shortest Execution Time
Marcie+red < Marcie 0 Times tool wins 1471 0
Do not compete 3 1532 49
Error detected 0 0 0  
Cannot Compute + Time-out 93 35 1


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than Marcie, denote cases where Marcie+red computed less values than Marcie, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, Marcie wins when points are above the diagonal.

memory chart time chart

Marcie+red versus Smart

Some statistics are displayed below, based on 3234 runs (1617 for Marcie+red and 1617 for Smart, so there are 1617 plots on each of the two charts). Each execution was allowed 30 minutes and 16 GByte of memory. Then performance charts comparing Marcie+red to Smart are shown (you may click on one graph to enlarge it).

Statistics on the executions
  Marcie+red Smart Both tools   Marcie+red Smart
All computed OK 1122 0 349   Smallest Memory Footprint
Marcie+red = Smart 0 Times tool wins 1282 189
Marcie+red > Smart 0   Shortest Execution Time
Marcie+red < Smart 0 Times tool wins 1347 124
Do not compete 52 0 0
Error detected 0 0 0  
Cannot Compute + Time-out 0 1174 94


On the chart below, denote cases where the two tools did computed all results without error, denote cases where the two tool did computed the same number of values (but not al values in the examination), denote cases where Marcie+red computed more values than Smart, denote cases where Marcie+red computed less values than Smart, denote the cases where at least one tool did not competed, denote the cases where at least one tool computed a bad value and denote the cases where at least one tool stated it could not compute a result or timed-out.

Marcie+red wins when points are below the diagonal, Smart wins when points are above the diagonal.

memory chart time chart