# Introduction

This page presents how Tapaal do cope efficiently with the CTLCardinality examination face to the other participating tools. In this page, we consider «All» models.

The next sections will show chart comparing performances in terms of both memory and execution time.The x-axis corresponds to the challenging tool where the y-axes represents Tapaal' performances. Thus, points below the diagonal of a chart denote comparisons favorables to the tool while others corresponds to situations where the challenging tool performs better.

You might also find plots out of the range that denote the case were at least one tool could not answer appropriately (error, time-out, could not compute or did not competed).

# Tapaal versus ITS-Tools

Some statistics are displayed below, based on 2036 runs (1018 for Tapaal and 1018 for ITS-Tools, so there are 1018 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to ITS-Tools are shown (you may click on one graph to enlarge it).

Statistics on the executions | ||||||

Tapaal | ITS-Tools | Both tools | Tapaal | ITS-Tools | ||

All computed OK | 558 | 2 | 227 | Smallest Memory Footprint | ||

Tapaal = ITS-Tools | — | — | 1 | Times tool wins | 759 | 237 |

Tapaal > ITS-Tools | — | — | 112 | Shortest Execution Time | ||

Tapaal < ITS-Tools | — | — | 96 | Times tool wins | 809 | 187 |

Do not compete | 0 | 0 | 0 | |||

Error detected | 1 | 0 | 0 | |||

Cannot Compute + Time-out | 1 | 558 | 22 |

On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than ITS-Tools,
denote cases where Tapaal
computed less values than ITS-Tools,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.

Tapaal wins when points are below the diagonal, ITS-Tools wins when points are above the diagonal.

# Tapaal versus ITS-Tools.M

Some statistics are displayed below, based on 2036 runs (1018 for Tapaal and 1018 for ITS-Tools.M, so there are 1018 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to ITS-Tools.M are shown (you may click on one graph to enlarge it).

Statistics on the executions | ||||||

Tapaal | ITS-Tools.M | Both tools | Tapaal | ITS-Tools.M | ||

All computed OK | 530 | 2 | 235 | Smallest Memory Footprint | ||

Tapaal = ITS-Tools.M | — | — | 1 | Times tool wins | 752 | 243 |

Tapaal > ITS-Tools.M | — | — | 132 | Shortest Execution Time | ||

Tapaal < ITS-Tools.M | — | — | 95 | Times tool wins | 820 | 175 |

Do not compete | 0 | 0 | 0 | |||

Error detected | 1 | 1 | 0 | |||

Cannot Compute + Time-out | 1 | 529 | 22 |

On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than ITS-Tools.M,
denote cases where Tapaal
computed less values than ITS-Tools.M,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.

Tapaal wins when points are below the diagonal, ITS-Tools.M wins when points are above the diagonal.

# Tapaal versus LoLA

Some statistics are displayed below, based on 2036 runs (1018 for Tapaal and 1018 for LoLA, so there are 1018 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to LoLA are shown (you may click on one graph to enlarge it).

Statistics on the executions | ||||||

Tapaal | LoLA | Both tools | Tapaal | LoLA | ||

All computed OK | 34 | 5 | 269 | Smallest Memory Footprint | ||

Tapaal = LoLA | — | — | 132 | Times tool wins | 511 | 488 |

Tapaal > LoLA | — | — | 448 | Shortest Execution Time | ||

Tapaal < LoLA | — | — | 111 | Times tool wins | 511 | 488 |

Do not compete | 0 | 0 | 0 | |||

Error detected | 1 | 3 | 0 | |||

Cannot Compute + Time-out | 4 | 31 | 19 |

On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than LoLA,
denote cases where Tapaal
computed less values than LoLA,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.

Tapaal wins when points are below the diagonal, LoLA wins when points are above the diagonal.

# Tapaal versus enPAC

Some statistics are displayed below, based on 2036 runs (1018 for Tapaal and 1018 for enPAC, so there are 1018 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to enPAC are shown (you may click on one graph to enlarge it).

Statistics on the executions | ||||||

Tapaal | enPAC | Both tools | Tapaal | enPAC | ||

All computed OK | 994 | 0 | 0 | Smallest Memory Footprint | ||

Tapaal = enPAC | — | — | 0 | Times tool wins | 994 | 0 |

Tapaal > enPAC | — | — | 0 | Shortest Execution Time | ||

Tapaal < enPAC | — | — | 0 | Times tool wins | 994 | 0 |

Do not compete | 0 | 0 | 0 | |||

Error detected | 1 | 0 | 0 | |||

Cannot Compute + Time-out | 0 | 995 | 23 |

On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than enPAC,
denote cases where Tapaal
computed less values than enPAC,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.

Tapaal wins when points are below the diagonal, enPAC wins when points are above the diagonal.

# Tapaal versus GreatSPN

Some statistics are displayed below, based on 2036 runs (1018 for Tapaal and 1018 for GreatSPN, so there are 1018 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to GreatSPN are shown (you may click on one graph to enlarge it).

Statistics on the executions | ||||||

Tapaal | GreatSPN | Both tools | Tapaal | GreatSPN | ||

All computed OK | 653 | 1 | 225 | Smallest Memory Footprint | ||

Tapaal = GreatSPN | — | — | 0 | Times tool wins | 774 | 221 |

Tapaal > GreatSPN | — | — | 20 | Shortest Execution Time | ||

Tapaal < GreatSPN | — | — | 96 | Times tool wins | 771 | 224 |

Do not compete | 0 | 0 | 0 | |||

Error detected | 1 | 0 | 0 | |||

Cannot Compute + Time-out | 0 | 653 | 23 |

On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than GreatSPN,
denote cases where Tapaal
computed less values than GreatSPN,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.

Tapaal wins when points are below the diagonal, GreatSPN wins when points are above the diagonal.

# Tapaal versus 2018-Gold

Some statistics are displayed below, based on 2036 runs (1018 for Tapaal and 1018 for 2018-Gold, so there are 1018 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to 2018-Gold are shown (you may click on one graph to enlarge it).

Statistics on the executions | ||||||

Tapaal | 2018-Gold | Both tools | Tapaal | 2018-Gold | ||

All computed OK | 0 | 0 | 413 | Smallest Memory Footprint | ||

Tapaal = 2018-Gold | — | — | 490 | Times tool wins | 490 | 504 |

Tapaal > 2018-Gold | — | — | 56 | Shortest Execution Time | ||

Tapaal < 2018-Gold | — | — | 35 | Times tool wins | 439 | 555 |

Do not compete | 0 | 0 | 0 | |||

Error detected | 0 | 0 | 1 | |||

Cannot Compute + Time-out | 0 | 0 | 23 |

On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than 2018-Gold,
denote cases where Tapaal
computed less values than 2018-Gold,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.

Tapaal wins when points are below the diagonal, 2018-Gold wins when points are above the diagonal.