Introduction
This page presents how Tapaal do cope efficiently with the StateSpace examination face to the other participating tools. In this page, we consider «Surprise» models.
The next sections will show chart comparing performances in terms of both memory and execution time.The x-axis corresponds to the challenging tool where the y-axes represents Tapaal' performances. Thus, points below the diagonal of a chart denote comparisons favorables to the tool while others corresponds to situations where the challenging tool performs better.
You might also find plots out of the range that denote the case were at least one tool could not answer appropriately (error, time-out, could not compute or did not competed).
Tapaal versus ITS-Tools
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for ITS-Tools, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to ITS-Tools are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | ITS-Tools | Both tools | Tapaal | ITS-Tools | ||
| All computed OK | 0 | 9 | 0 | Smallest Memory Footprint | ||
| Tapaal = ITS-Tools | — | — | 2 | Times tool wins | 2 | 9 |
| Tapaal > ITS-Tools | — | — | 0 | Shortest Execution Time | ||
| Tapaal < ITS-Tools | — | — | 0 | Times tool wins | 1 | 10 |
| Do not compete | 0 | 0 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 9 | 0 | 38 | |||
On the chart below, 
denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than ITS-Tools,
denote cases where Tapaal
computed less values than ITS-Tools,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and 
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, ITS-Tools wins when points are above the diagonal.
Tapaal versus ITS-Tools.M
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for ITS-Tools.M, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to ITS-Tools.M are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | ITS-Tools.M | Both tools | Tapaal | ITS-Tools.M | ||
| All computed OK | 0 | 6 | 0 | Smallest Memory Footprint | ||
| Tapaal = ITS-Tools.M | — | — | 2 | Times tool wins | 2 | 6 |
| Tapaal > ITS-Tools.M | — | — | 0 | Shortest Execution Time | ||
| Tapaal < ITS-Tools.M | — | — | 0 | Times tool wins | 1 | 7 |
| Do not compete | 0 | 0 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 6 | 0 | 41 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than ITS-Tools.M,
denote cases where Tapaal
computed less values than ITS-Tools.M,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, ITS-Tools.M wins when points are above the diagonal.
Tapaal versus LTSMin
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for LTSMin, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to LTSMin are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | LTSMin | Both tools | Tapaal | LTSMin | ||
| All computed OK | 0 | 5 | 0 | Smallest Memory Footprint | ||
| Tapaal = LTSMin | — | — | 2 | Times tool wins | 1 | 6 |
| Tapaal > LTSMin | — | — | 0 | Shortest Execution Time | ||
| Tapaal < LTSMin | — | — | 0 | Times tool wins | 0 | 7 |
| Do not compete | 0 | 13 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 18 | 0 | 29 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than LTSMin,
denote cases where Tapaal
computed less values than LTSMin,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, LTSMin wins when points are above the diagonal.
Tapaal versus enPAC
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for enPAC, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to enPAC are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | enPAC | Both tools | Tapaal | enPAC | ||
| All computed OK | 1 | 0 | 0 | Smallest Memory Footprint | ||
| Tapaal = enPAC | — | — | 0 | Times tool wins | 2 | 0 |
| Tapaal > enPAC | — | — | 1 | Shortest Execution Time | ||
| Tapaal < enPAC | — | — | 0 | Times tool wins | 2 | 0 |
| Do not compete | 0 | 13 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 13 | 1 | 34 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than enPAC,
denote cases where Tapaal
computed less values than enPAC,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, enPAC wins when points are above the diagonal.
Tapaal versus GreatSPN
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for GreatSPN, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to GreatSPN are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | GreatSPN | Both tools | Tapaal | GreatSPN | ||
| All computed OK | 0 | 7 | 0 | Smallest Memory Footprint | ||
| Tapaal = GreatSPN | — | — | 0 | Times tool wins | 0 | 9 |
| Tapaal > GreatSPN | — | — | 0 | Shortest Execution Time | ||
| Tapaal < GreatSPN | — | — | 2 | Times tool wins | 1 | 8 |
| Do not compete | 0 | 0 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 7 | 0 | 40 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than GreatSPN,
denote cases where Tapaal
computed less values than GreatSPN,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, GreatSPN wins when points are above the diagonal.
Tapaal versus smart
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for smart, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to smart are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | smart | Both tools | Tapaal | smart | ||
| All computed OK | 0 | 5 | 0 | Smallest Memory Footprint | ||
| Tapaal = smart | — | — | 0 | Times tool wins | 2 | 5 |
| Tapaal > smart | — | — | 0 | Shortest Execution Time | ||
| Tapaal < smart | — | — | 2 | Times tool wins | 1 | 6 |
| Do not compete | 0 | 13 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 18 | 0 | 29 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than smart,
denote cases where Tapaal
computed less values than smart,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, smart wins when points are above the diagonal.
Tapaal versus TINA.tedd
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for TINA.tedd, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to TINA.tedd are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | TINA.tedd | Both tools | Tapaal | TINA.tedd | ||
| All computed OK | 0 | 7 | 0 | Smallest Memory Footprint | ||
| Tapaal = TINA.tedd | — | — | 0 | Times tool wins | 2 | 7 |
| Tapaal > TINA.tedd | — | — | 0 | Shortest Execution Time | ||
| Tapaal < TINA.tedd | — | — | 2 | Times tool wins | 1 | 8 |
| Do not compete | 0 | 0 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 7 | 0 | 40 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than TINA.tedd,
denote cases where Tapaal
computed less values than TINA.tedd,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, TINA.tedd wins when points are above the diagonal.
Tapaal versus 2018-Gold
Some statistics are displayed below, based on 98 runs (49 for Tapaal and 49 for 2018-Gold, so there are 49 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing Tapaal to 2018-Gold are shown (you may click on one graph to enlarge it).
| Statistics on the executions | ||||||
| Tapaal | 2018-Gold | Both tools | Tapaal | 2018-Gold | ||
| All computed OK | 0 | 8 | 0 | Smallest Memory Footprint | ||
| Tapaal = 2018-Gold | — | — | 0 | Times tool wins | 1 | 9 |
| Tapaal > 2018-Gold | — | — | 0 | Shortest Execution Time | ||
| Tapaal < 2018-Gold | — | — | 2 | Times tool wins | 1 | 9 |
| Do not compete | 0 | 0 | 0 | |||
| Error detected | 0 | 0 | 0 | |||
| Cannot Compute + Time-out | 8 | 0 | 39 | |||
On the chart below, denote cases where
the two tools did computed all results without error,
denote cases where the two tool did computed the
same number of values (but not al values in the examination),
denote cases where Tapaal
computed more values than 2018-Gold,
denote cases where Tapaal
computed less values than 2018-Gold,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool computed a bad value and
denote the cases where at least one tool stated it could not compute a result or timed-out.
Tapaal wins when points are below the diagonal, 2018-Gold wins when points are above the diagonal.
