Introduction
This page presents how LTSMin do cope efficiently with the StateSpace examination face to the other participating tools. In this page, we consider «Stripped» models.
The next sections will show chart comparing performances in termsof both memory and execution time.The x-axis corresponds to the challenging tool where the y-axes represents LTSMin' performances. Thus, points below the diagonal of a chart denote comparisons favorables to the tool whileothers corresponds to situations where the challenging tool performs better.
You might also find plots out of the range that denote the case were at least one tool could not answer appropriately (error, time-out, could not compute or did not competed).
LTSMin versus GreatSPN-Meddly
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for GreatSPN-Meddly, so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to GreatSPN-Meddly are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | GreatSPN-Meddly | Both tools | LTSMin | GreatSPN-Meddly | ||
| Computed OK | 47 | 58 | 70 | Smallest Memory Footprint | ||
| Do not compete | 0 | 0 | 0 | Times tool wins | 48 | 127 |
| Error detected | 1 | 25 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 62 | 27 | 224 | Times tool wins | 56 | 119 |
On the chart below, 
denote cases where
the two tools did computed a result, 
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and 
denote the cases where at least one tool stated it could not compute a result or timed-out.
LTSMin versus ITS-Tools
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for ITS-Tools, so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to ITS-Tools are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | ITS-Tools | Both tools | LTSMin | ITS-Tools | ||
| Computed OK | 8 | 100 | 109 | Smallest Memory Footprint | ||
| Do not compete | 0 | 0 | 0 | Times tool wins | 35 | 182 |
| Error detected | 1 | 9 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 106 | 6 | 180 | Times tool wins | 61 | 156 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
LTSMin versus Marcie
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for Marcie, so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to Marcie are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | Marcie | Both tools | LTSMin | Marcie | ||
| Computed OK | 8 | 59 | 109 | Smallest Memory Footprint | ||
| Do not compete | 0 | 0 | 0 | Times tool wins | 57 | 119 |
| Error detected | 1 | 4 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 61 | 7 | 225 | Times tool wins | 80 | 96 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
LTSMin versus pnmc
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for pnmc, so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to pnmc are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | pnmc | Both tools | LTSMin | pnmc | ||
| Computed OK | 5 | 36 | 112 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 51 | 102 |
| Error detected | 1 | 0 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 172 | 5 | 114 | Times tool wins | 51 | 102 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
LTSMin versus PNXDD
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for PNXDD, so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to PNXDD are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | PNXDD | Both tools | LTSMin | PNXDD | ||
| Computed OK | 117 | 0 | 0 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 117 | 0 |
| Error detected | 1 | 0 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 137 | 118 | 149 | Times tool wins | 117 | 0 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
LTSMin versus TAPAAL(MC)
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for TAPAAL(MC), so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to TAPAAL(MC) are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | TAPAAL(MC) | Both tools | LTSMin | TAPAAL(MC) | ||
| Computed OK | 61 | 4 | 56 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 69 | 52 |
| Error detected | 1 | 0 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 140 | 61 | 146 | Times tool wins | 78 | 43 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
_StateSpace.png)
_StateSpace.png)
LTSMin versus TAPAAL(SEQ)
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for TAPAAL(SEQ), so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to TAPAAL(SEQ) are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | TAPAAL(SEQ) | Both tools | LTSMin | TAPAAL(SEQ) | ||
| Computed OK | 61 | 4 | 56 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 67 | 54 |
| Error detected | 1 | 0 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 140 | 61 | 146 | Times tool wins | 78 | 43 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
_StateSpace.png)
_StateSpace.png)
LTSMin versus TAPAAL-OTF(PAR)
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for TAPAAL-OTF(PAR), so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to TAPAAL-OTF(PAR) are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | TAPAAL-OTF(PAR) | Both tools | LTSMin | TAPAAL-OTF(PAR) | ||
| Computed OK | 63 | 9 | 54 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 76 | 50 |
| Error detected | 1 | 26 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 157 | 49 | 129 | Times tool wins | 88 | 38 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
_StateSpace.png)
_StateSpace.png)
LTSMin versus TAPAAL-OTF(SEQ)
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for TAPAAL-OTF(SEQ), so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to TAPAAL-OTF(SEQ) are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | TAPAAL-OTF(SEQ) | Both tools | LTSMin | TAPAAL-OTF(SEQ) | ||
| Computed OK | 59 | 3 | 58 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 69 | 51 |
| Error detected | 1 | 100 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 196 | 16 | 90 | Times tool wins | 82 | 38 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
_StateSpace.png)
_StateSpace.png)
LTSMin versus StrataGEM0.5.0
Some statistics are displayed below, based on 808 runs (404 for LTSMin and 404 for StrataGEM0.5.0, so there are 404 plots on each of the two charts). Each execution was allowed 1 hour and 16 GByte of memory. Then performance charts comparing LTSMin to StrataGEM0.5.0 are shown (you may click on one graph to enlarge it).
| Statistics on the execution | ||||||
| LTSMin | StrataGEM0.5.0 | Both tools | LTSMin | StrataGEM0.5.0 | ||
| Computed OK | 22 | 49 | 95 | Smallest Memory Footprint | ||
| Do not compete | 0 | 137 | 0 | Times tool wins | 56 | 110 |
| Error detected | 1 | 0 | 0 | Shortest Execution Time | ||
| Cannot Compute + Time-out | 185 | 22 | 101 | Times tool wins | 101 | 65 |
On the chart below, denote cases where
the two tools did computed a result,
denote the cases where at least one tool did not competed,
denote the cases where at least one
tool did a mistake and
denote the cases where at least one tool stated it could not compute a result or timed-out.
